Q-See QSC26416 Uživatelský manuál stáhnout pdf (Strana 75)

User Manual for Commercial Series Net DVR

Page 75 Total 121

Press “Confirm” you go back to “Recording” menu. Press “Confirm” again to save the

parameters and return to main menu.

Note:

1) If record type is “Motion Detect” or other related types, you must setup “Motion

Detection” in order to trigger motion recording (refer to chapter 5.10).

2) If record type is “Alarm” or other related types, you must setup “Alarms” in order to

trigger alarm recording (refer to chapter 5.13).

3) The time period is among 00:00—24:00.

6.13 External Alarm Input and Relay Output

For 8-channel DVR, there are 8 external alarm inputs and 4 relay outputs. For 16-channel

DVR, there are 16 external alarm inputs and 4 relay outputs. In “Alarms” menu, you can setup

each external alarm input.

In main menu, move “Active Frame” to “Alarms” icon and press【ENTER】key to enter into

alarms menu:

External alarm input setup:

Step 1: Select one alarm input Use【↑】【↓】keys to select one alarm input.

Step 2: Alarm type

This is sensor type. You can select “Normal Open” or “Normal Close” according to the

sensor type.

Step 3: Enter into “Alarm in Handling” sub menu

In the “Alarms” menu, there are two options for “Alarm Handling” item. One is “Ignore”,

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 120 121

Žádné komentáře

Q-See QSC26416 Uživatelský manuál Strana 75