Q-See QC40198 Uživatelský manuál stáhnout pdf

SETTING UP REMOTE ACCESS FOR Q-SEE DVR SYSTEMS

MODEL NUMBER: QC40198

Accessing the DVR from a Computer Attached to the Same Router:

If you are only going to access the DVR from a computer that is attached to the same router as the DVR

you only need to setup the information in the NETWORK settings using either the DHCP option or

assigning a static IP following the instructions below. Since you are just going from one location to

another on the same network port forwarding and knowing the public IP address are not necessary. You

would just access the DVR by entering the IP address of the DVR from the NETWORK setup into the

Internet Explorer browser window. After you setup the NETWORK settings using DHCP or Static IP

instructions, refer to the section in this document entitled “Accessing the DVR through Internet

Explorer”.

There are 4 ways you can setup the DVR to be accessed remotely; DHCP, Static IP, PPPOE, and DDNS.

DHCP: If your router is setup for DHCP, and most of them are by default, you can have the router assign

an IP address to the DVR. To do this go to the setting option in the Main Menu and select the Network

icon (Red square in Picture 1), this will display the NETWORK screen shown in Picture 2. Select the

DHCP option box (Green box in Picture 2) and then double click on the DNS option in the Advanced

section (Red box in Picture 2) which will display the DNS option box shown in Picture 2. Select the option

to find address automatically as shown in Picture 2 then click on OK and restart the DVR so the router

can find it and assign it an IP address.

Picture 1 Picture 2

Static IP: You will need to setup the network settings on the DVR to match the settings of the router that

you attach the DVR to. To get the router settings you would go to the run option on a computer attached

to the same router as the DVR and type cmd and hit OK to bring up a command prompt (Picture 3), then

type ipconfig at the prompt (RED arrow on Picture 3) to access the router settings. Write down the

gateway and subnet mask numbers (GREEN arrows on (Picture 3) so you can copy them into the

network settings on the DVR (GREEN boxes on Picture 4). Go to the Setting option in the Main Menu and

select the Network icon (Red square in Picture 1), to get to the NETWORK screen shown in Picture 4.

1 2 3 4 5 6 7 8

Shrnutí obsahu

Strany 1

SETTING UP REMOTE ACCESS FOR Q-SEE DVR SYSTEMS MODEL NUMBER: QC40198 Accessing the DVR from a Computer Attached to the Same Router: If you are on

Strany 2 - MODEL NUMBER: QC40198

SETTING UP REMOTE ACCESS FOR Q-SEE DVR SYSTEMS MODEL NUMBER: QC40198 2 | Page Picture 3 Picture 4 For the DVRs IP address you would enter

Strany 3

SETTING UP REMOTE ACCESS FOR Q-SEE DVR SYSTEMS MODEL NUMBER: QC40198 3 | Page DDNS option in the Advanced Settings (Red box in Picture 7) which will

Strany 4

SETTING UP REMOTE ACCESS FOR Q-SEE DVR SYSTEMS MODEL NUMBER: QC40198 4 | Page Picture 11 TO ACCESS THE DVR THROUGH INTERNET EXPLORER: Once you h

Strany 5

SETTING UP REMOTE ACCESS FOR Q-SEE DVR SYSTEMS MODEL NUMBER: QC40198 5 | Page Picture 13 Picture 14 To connect to the

Strany 6

SETTING UP REMOTE ACCESS FOR Q-SEE DVR SYSTEMS MODEL NUMBER: QC40198 6 | Page If you get a error message that says the program cannot load because t

Strany 7

SETTING UP REMOTE ACCESS FOR Q-SEE DVR SYSTEMS MODEL NUMBER: QC40198 7 | Page  Section 2: Here are channel number and three function buttons: Star

Strany 8 - Questions or Comments?

SETTING UP REMOTE ACCESS FOR Q-SEE DVR SYSTEMS MODEL NUMBER: QC40198 8 | Page Questions or Comments? Contact Us: Mailing Address: Customer Serv

Další dokumenty pro Digitální videorekordéry (DVR) Q-See QC40198

Zobrazit dokument Q-See QC40198 Uživatelský manuál

Q-See QC40198 Uživatelský manuál (141 stránky)

Komentáře k této Příručce

Žádné komentáře

Q-See QC40198 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Digitální videorekordéry (DVR) Q-See QC40198. setting up remote access for q-see dvr systems Uživatelská příručka

Shrnutí obsahu

Další dokumenty pro Digitální videorekordéry (DVR) Q-See QC40198

Komentáře k této Příručce

Související produkty a manuály pro Digitální videorekordéry (DVR) Q-See QC40198