12 13
2.4 BASIC CONFIGURATION
You will need to access your DVRs through CMS in order to monitor them.
STEP 1. Click on the System Config
button at the lower right of the
Control Center Operation
Interface.
This will change the screen to the
Device Manager window which
will allow you to begin to add one or
more DVRs to your system. Adding
an IP camera is done in the same
manner.
STEP 2. Click on the Add Region icon at the upper left of the window.
Add
Region
Add
Device
Modify Delete
STEP 3. Name the new region. This can
be named whatever you want - up to
32 characters in length. If you have
several DVRs in a building, you may
want to name the region after that
location for easy reference. You can
also add sub-regions if needed.
STEP 4. Once you have set up your region, you can add one or more DVRs or IP
cameras to it by clicking on the Add Device icon.
Device Name - You can name the device (DVR or camera) anything you chose but it is
generally helpful to use a descriptive term that will help you quickly identify it. There is
a 32 character limit.
Server - The Internet IP or DDNS address which allows you to access your DVR
from outside of your Local Area Network (LAN). Please see your DVR’s Remote
Monitoring Guide or camera’s manual for instructions on how to configure your
DVR for access over the Internet.
Data Port - Typically 6036 for the QT-series unless you had to configure it differently
during setup.
User Name and Password - These are the same as you use to log into your DVR. By
default, they are admin and 123456.
Search Device - Use this only if you are connecting to DVRs connected to the same
router as your computer. It will not bring up devices located outside of your LAN.
When you have successfully added a device,
it will show up in the selected region along
with a list of cameras available for viewing.
Repeat the steps above to add more devices
(if any).
Use the Modify tool to rename or modify
the settings for the region or any connected
systems. If you change the password or user
name on your DVR, you will need to update
that information within CMS using this tool.
Delete can be used to remove systems or
regions as needed.
(23 stránky)
(36 stránky)
(120 stránky)
(54 stránky)
(75 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce