Q-See QSD42908 Net Uživatelský manuál stáhnout pdf (Strana 62)

QSD42908C8 User’s Manual

5.14 Network Parameters

If you want to access the DVR over a network you must setup network parameters.

Note: If any network parameter is modified, you must save and reboot the DVR to make it

effective.

In main menu, move the “Active Frame” to the “Network” icon and press【ENTER】, you

will enter into “Network” menu as shown in fig 5.27

Fig 5.27 network setup

“Network” menu description:

IP address: This IP address must not be conflict with another IP address on the router. If

there is a DHCP server in the network, you can set the IP as “0.0.0.0”, save and reboot the DVR.

In reboot process, the DVR will search the DHCP server and get one dynamic IP address. This

item will display the dynamic IP address. If DVR uses PPPoE function the DVR can dial into the

internet and this item will display the dynamic internet IP address.

Port: Network access port number, must be greater than 2000.

Mask: This is sub net mask.

Gateway: The gateway IP is used to communicate with different network segments, it is the

network IP of the router the DVR is attached to.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 100 101

Žádné komentáře

Q-See QSD42908 Net Uživatelský manuál Strana 62